CGPSC ARTO and Transport Sub Inspector Recruitment 2022

CGPSC has released notification for the post of ARTO and Transport Sub Inspector Exam 2022. This exam is a prestigious exam and one of the best opportunity for mechanical engineering graduates. Interested and eligible candidates can apply on psc.cg.gov.in. The Syllabus, exam details, salary, number of posts for this exam is provided in the post below.

CGPSC ARTO and Transport Sub Inspector Exam 2022 Eligibility Criteria Vacancy Details

CGPSC ARTO and Transport Sub Inspector Exam 2022 Eligibility Criteria

Educational Qualification: Assistant Regional Transport Officer: Bachelor’s degree in a automobile engineering or mechanical engineering from a recognised university.

Transport Sub Inspector (Tech): Diploma in automobile engineering or mechanical engineering from a recognised university.

CGPSC ARTO and Transport Sub Inspector Exam 2022 Eligibility Criteria 2022 Age Limit:

 24 to 30 years (Age relaxation in upper age limit as per government norms)

CGPSC ARTO and Transport Sub Inspector Exam 2022 Eligibility Criteria Application Fee:

• Other candidates of Chhattisgarh: Rs. 400/-
• SC/ST/OBC candidates of Chhattisgarh: Rs. 300/-

CGPSC ARTO and Transport Sub Inspector Exam 2022 Eligibility Criteria Salary Details:

Many people ask what is the salary of CGPSC ARTO and Transport Sub Inspector in chhattisgarh ? The gross salary of CGPSC ARTO and Transport Sub Inspector Exam 2022 is calculated below as an example. (Note : Actual salary may vary slightly from the below data.)

1. Grade Pay for Assistant Regional Transport Officer (ARTO) Salary

Grade Pay for Assistant Regional Transport Officer in Chhattisgarh from the Chart is 3400 and Pay scale 38100–120400 (Level 9). According to 7th Pay Commission (from 2018–19) CGPSC Principal Grade I Salary can be calculated from the table below.

2. CGPSC Transport Sub Inspector (Tech) Salary

Grade Pay for CGPSC Transport Sub Inspector (Tech) in Chhattisgarh from the Chart is 2800 and Pay scale 28700–91300 (Level 7). According to 7th Pay Commission (from 2018–19) CGPSC Transport Sub Inspector (Tech) Salary can be calculated from the table below.

Chhattisgarh CGPSC ARTO and Transport Sub Inspector Exam 2022 : Pattern, Selection Process & Syllabus PDF 

SELECTION  PROCESS:

There are total 20 CGPSC ARTO and Transport Sub Inspector Exam 2022 which will be filled through CGPSC ARTO and Transport Sub Inspector Exam 2022 examination. Selection rounds for this CGPSC ARTO and Transport Sub Inspector Exam 2022 is given below.

1. Written Exam
2. Interview

CGPSC ARTO and Transport Sub Inspector Exam 2022 Syllabus

Part-1 General Knowledge of Chhattisgarh

1. History of Chhattisgarh and contributions of Chhattisgarh in freedom struggle.

2. Geography, water, mineral resources, climate and physical conditions.

3. Literature, music, dance, art and culture of Chhattisgarh.

4. Tribals, dialects, teej and festivals of Chhattisgarh.

5. Economy, forest and agriculture of Chhattisgarh.

6. Administrative structure of Chhattisgarh, local government and Panchayati Raj.

7. Human Resources and energy resources in Chhattisgarh.

8. Education, health and contemporary events in Chhattisgarh.

CGPSC ARTO and Transport Sub Inspector Exam 2022

Part-2 Mechanical/Automobile Engineering

1. Thermodynamics, Cycles and IC Engines: Basic concepts,Open and Closed systems. Heat and work. Zeroth, first, second law. Application to non-flow and flow processes, Entropy, Properties of ideal gases and vapours. Standard vapour, Gas power and refrigeration cycles. Two stage compressor. Petrol and diesel Engines, two stroke and four stroke engine, governing lubrication, emission and control, Conventional and nuclear fuels, elements of nuclear power production. https://cgpscguruji.in/
2. Heat transfer, Refrigeration and Air-conditioning: Modes of heat transfer, conduction, Fourier’s law of conduction, thermal 11, resistance, free and forced convection, Newton’s law of cool­ing, basic concept in radiation, Stefan Boltzmann’s law, Heat pump and refrigeration cycles and systems, Refrigerants. Condenser, evaporators and expansion devices, Psychometric, charts and application to air conditioning, sensible heating and cooling, effective temperature, comfort indices, load cal­culations, controls, duct design.
3. Fluid Mechanics: Properties and classification of fluids, manometer, forces on immersed surfaces, center of pressure, buoy­ancy, elements of stability of floating bodies, Bernoulli’s equa­tion, fully developed flow through pipes, pressure drop calcu­lation, measurement of flow rate and pressure drop, laminar 13. and turbulent flows.
4. Fluid Machinery and steam generators: Performance, opera­tion and control of hydraulic pumps and impulse and reaction turbine, specific speed, classification, energy transfer, power transmission, stream generators fire and water tube boilers, flow of steam through nozzles and diffusers, wetness and condensation, various types of steam and gas turbines, velocity diagrams, reciprocating compressor, multistage compression, reheat, re­generation, efficiency, Governance.
5. Automobile Engineering: Components of an automobile, con­struction details chassis, clutches, transmission system, propel­ler shaft and rear axle, suspension system, front axle and steer­ing, wheels and tyres, braking system, automotive electrical systems, safety consideration, maintenance and troubleshoot­ing, automobile laws. https://cgpscguruji.in/
6. Theory of Machine: Kinematics and dynamic analysis of mechanisms, cams, gears and gear trains, flywheels, governors, balancing of rigid rotors, linear vibration analysis of mechani­cal system, critical speeds and whirling of shafts.
7. Machine Design: Design of joints: cotters, keys, riveted joint, welded joints, threaded fasteners, keys and coupling, spring shaft and axle, belt and rope drive, Design of bearing, rolling element bearings. https://cgpscguruji.in/
8. Strength of Materials: Stress and strain in two dimensions, stress-strain relation, uniaxial loading, thermal stresses, Beams shear force and bending moment diagram, bending stresses and deflection of beams, shear stress distribution, torsion of shaft, helical springs, thin walled pressure vessels, struts and col­umns.
9. Engineering Materials: Basic concepts on structure of solid crystalline materials, defect in crystalline materials, alloys and binary phase diagrams, structure and properties of common en­gineering materials, heat treatment of steels, plastics, ceramics, common application of various materials. https://cgpscguruji.in/
10. Production Engineering:
    1. Metal forming: basic principles of forging, drawing and ex­trusion, rolling, powder metallurgy.
    1. Metal Casting: die casting, investment casting, shell mould­ing, centrifugal casting, gating and riser, furnaces.
    1. Fabrication processes: Principle of gas, arc, shielded arc weld­ing, advanced welding processes, weldability: metallurgy of welding.

• Metal Cutting: turning, drilling, boring, milling, gear manu­facturing, grinding and finishing processes, computer controlled manufacturing system, CNC, DNC, cutting tools materials, tool geometry, mechanism of tool wear, tool life and machinability, measurement of cutting forces, economics of machining, uncon­ventional machining processes, Jigs and fixtures, fits and toler­ances.  https://cgpscguruji.in/
• Industrial Engineering: Production planning and control, work study, method study, Material handling and plant layout, Job evaluation, PERT and CPM. Inventory control, ABC analysis, EOQ model, work measurement, quality management, quality analysis and control, Operation research: linear programming-graphical methods, Value engineering: value analysis for cost/ value.
• Metrology and Instrumentation: Simple Inspection, General measurement concept, Linear measurement, Angular measure­ment, Straightness flatness square ness & roundness testing, Surface roughness, Screw thread measurement, Gear measure­ment, Limit gauges, Transducers & Temperature measurement. https://cgpscguruji.in/
• Machine Drawing: First and third angle projection, isometric and orthographic projection, sectional views, conventional rep­resentation of machine components, surface roughness.

Syllabus By – https://cgpscguruji.in/

Syllabus for Principal Grade II/Placement Officer/ Assistant Director (Technical) Exam 2021 PDF Download : Click Here to Download

CG PSC CGPSC CGPSC ARTO and Transport Sub Inspector Exam 2022 Previous Year Question Paper

For official notification visit https://psc.cg.gov.in/index.htm

Read Official Advertisement Here
For Official Website Click Here