CGPSC Principal Grade I & Principal Grade II/Placement Officer 2021 Post Details : CGPSC has released 49 notification for the post of Principal Grade I & Principal Grade II/Placement Officer Post 2021. This exam is a prestigious exam and one of the best opportunity for engineering graduates. Interested and eligible candidates can apply on psc.cg.gov.in. The Syllabus, exam details, salary, number of posts for this exam is provided in the post below.
EXAM | DETAILS |
---|---|
Name of Exam | Principal Grade I & Principal Grade II/Placement Officer/ Assistant Director (Technical) |
Conducted By | Chhattisgarh Public Service Commission (CGPSC) |
Name of post | Principal Grade I-01 Principal Grade II/Placement Officer-38 Backlog/Carryforward-10 |
Total posts | 49 Posts |
Entrance Exam Level | State Level Exam |
Examination Mode | Offline |
Exam Type | MCQ Based |
Online Application Submission Starting Date: | 28 December 2021 |
Last Date to pay application fee | 26 January 2022 |
Correction in Application Form | 27 January 2022 to 31 January 2022 |
Admit Card Date | April 2022 |
Written Exam Date | 1 May 2022 |
Examination Location | Chhattisgarh |
Admit Card Status | To be released soon |
Table of Contents
CGPSC Principal Grade I & Principal Grade II/Placement Officer/ Assistant Director (Technical) 2021 Eligibility Criteria Vacancy Details
Vacancy Details | ||
S. No. | Name of Post | Total |
1 | Principal Grade I | 01 |
2 | Principal Grade I & Principal Grade II/Placement Officer/ Assistant Director (Technical) | 48 |
CGPSC Principal Grade I & Principal Grade II/Placement Officer/ Assistant Director (Technical) 2021 Eligibility Criteria
Educational Qualification: B.E/B.Tech/Engineering/Diploma from a recognized University.
CG PSC CGPSC Principal Grade I/Placement Officer/ Assistant Director (Technical) 2021 Age Limit:
25 to 30 years (Age relaxation in upper age limit as per government norms)
CGPSC CGPSC Principal Grade I & Principal Grade II/Placement Officer/ Assistant Director (Technical) 2021 Eligibility Criteria Application Fee:
- Other candidates of Chhattisgarh: Rs. 400/-
- SC/ST/OBC candidates of Chhattisgarh: Rs. 300/-
CGPSC Principal Grade I Salary Details:
S.No | Name of the Post | Pay Matrix |
1. | Principal Grade I | Pay Matrix Level-13 |
2. | Principal Grade II/Placement Officer/ Assistant Director (Technical) 2021 | Pay Matrix Level-12 |
Many people ask what is the salary of Principal Grade I/Placement Officer/ Assistant Director (Technical) 2021 Eligibility Criteria 2021 in chhattisgarh ? The gross salary of Principal Grade I/Placement Officer/ Assistant Director (Technical) 2021 Eligibility Criteria 2021 is calculated below as an example. (Note : Actual salary may vary slightly from the below data.)
1. Grade Pay for Principal Grade I Salary
Grade Pay for Principal Grade I in Chhattisgarh from the Chart is 6600 and Pay scale 15600–39100 (Level 13). According to 7th Pay Commission (from 2018–19) CGPSC Principal Grade I Salary can be calculated from the table below.
CGPSC Principal Grade I Salary | Calculation | Salary |
Basic Pay for Principal Grade I in Chhattisgarh | Rs. 67300 | |
DA 17% (July 2021) | = 0.17 x 67300 | Rs. 11441 |
HRA 8% (normal) | = 0.08 x 67300 | Rs. 5384 |
Other Allowance (Lets say) | Rs. 4000 | |
Total Salary | Rs. 88125 per month | |
Deduction Now, NPS 10% deduction (Pension) | = 0.10 x 88125 | Rs. 8812.5 |
In hand salary of CGPSC Principal Grade I in Chhattisgarh per month | = 88125 -8812.5 | Rs. 79312.5 |
2. CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) Salary
Grade Pay for CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) in Chhattisgarh from the Chart is 5400 and Pay scale 15600–39100 (Level 12). According to 7th Pay Commission (from 2018–19) CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) Salary can be calculated from the table below.
CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) Salary | Calculation | Salary |
Basic Pay for Principal Grade II/Placement Officer/ Assistant Director (Technical) in Chhattisgarh | Rs. 56100 | |
DA 17% (July 2021) | = 0.17 x 56100 | Rs. 9537 |
HRA 8% (normal) | = 0.08 x 56100 | Rs. 4488 |
TA (Lets say) | Rs. 3600 | |
Total Salary | Rs. 73725 per month | |
Deduction Now, NPS 10% deduction (Pension) | = 0.10 x 73725 | Rs. 7372.5 |
In hand salary of CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) in Chhattisgarh per month | = 73725 -7372 | Rs. 66352 |
Chhattisgarh CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) Exam 2021 : Pattern, Selection Process & Syllabus PDF
SELECTION PROCESS:
There are total 49 Assistant Engineer Vacancy in Water Resource department which will be filled through CGPSC CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) 2021 examination. Selection rounds for this CGPSC CGPSC Principal Grade II/Placement Officer/ Assistant Director (Technical) Exam 2021 is given below.
- Written Exam
- Interview
Paper Name | Duration | Paper Wise Marks |
General Studies & Engineering (150-Questions) | 3 hours | 300 Marks |
Interview | 75 Marks |
CG PSC Principal Grade I & Principal Grade II/Placement Officer Syllabus
Part-1 General Knowledge of Chhattisgarh
1. History of Chhattisgarh and contributions of Chhattisgarh in freedom struggle.
2. Geography, water, mineral resources, climate and physical conditions.
3. Literature, music, dance, art and culture of Chhattisgarh.
4. Tribals, dialects, teej and festivals of Chhattisgarh.
5. Economy, forest and agriculture of Chhattisgarh.
6. Administrative structure of Chhattisgarh, local government and Panchayati Raj.
7. Human Resources and energy resources in Chhattisgarh.
8. Education, health and contemporary events in Chhattisgarh.
Part-2 General Knowledge of Chhattisgarh
(A) APPLIED MATHEMATICS
1. Concept and principles of determents. Properties of determents Computation of Mean and R.M.S. Value General equation of second degree, Nature of roots, Formation of Equation Class-I, II,III, IV.
2. Half angles, Double Angles, Triple angles General solution of Trigonometrically equation
3. Locus standard forms. General equation of a straight line and its rotation to the structural forms, Straight line through one and two point Transformation of coordinates when the origin is shifted or the axes are rotated
4. Definition, Standard forms, General equation, Center and radius. Parabola Ellipse
5. Independent and dependent variables, different type of functions, Concept of limit and its valuation
6. Differentiation by first principle of Algebra, Trigonometrical, Exponential and Logarithmic functions. Differentiation of sum, Product and quotient of two functions and functions of a function
7. Concept of Vector and Scalar Quantities Understand the Principle of addition, subtraction of Vector Componet of Vector, Standard unit Vectors ijk
8. Scalar product and its applications, Vector products and application
9. Introduction, Graphical representation, Histogram, France polygon, Frequency, Curve, Central Tendency Mean, Median , Mode
10. Measure of dispersion Range Quartile deviation Standard, Deviation Root Mean square deviation
(B) APPLIED PHYSICS :-
11. Fundamental units, Derived units, unit system, S.I. units—Their impotence & notation, Base, S.I. units system &Abbreviations, Principle of vernier calipers, screw gauge & Speedometer. Scalar & Vector quantities, Representation of Vectors, kinds of Vectors, addition & Subtraction of vectors, multiplication of a vector by a scalar, linear combination of vectors, Resolution of vector, position vector, scalar products & vector product.
12 2.1Classification of motion— Characteristic of different types of motion, Newton’s laws of motion, Conservative & non-conservative force, speed & Velocity, Acceleration, equation of motion, concept of mass, weight & weightlessness, Friction, limiting friction, Angle of friction and coefficient of friction, Static & dynamic friction, Friction-a necessity and an evil.
2.2 Circular motion Motion of a particle on the circle with constant speed, Related Physical quantities, Relation between linear & angular velocities, centripetal & centrifugal forces, Banking of Road and bending ofcyclist.
2.3 Rotatory motionAxis of motion, moment of inertia, Radius of gyration , Kinetic energy of rotation, derivation of equation of kinetic energy of a rotating body. Torque acting on a particle, angular momentum, relation between torque and angular acceleration. Newton’s law of Gravitation, Basic forces in nature, Gravitational field, Potential, Relation between “g” & “G”, factors influencing “g” escape velocity, kepler’s Laws of planetary motion, satellites, Time period of satellites, simple pendulum.
13. Concept of elasticity, Deformation, Stress, Strain- its kinds and units, Hooke’s law, elastic unit , elastic fatigue, Modulus of elasticity’s, Young’s Modulus and its determination by Searl’s method. Molecular forces, cohesive and adhesive forces, surface tension & surface energy, Reason for spherical shape of Rain Drops, Angle of contact, pressure difference a liquid surface excess pressure inside a liquid drop & soap bubble, shape of liquid surface In a capillary tube, Rise of liquids in a capillary tube, Determination of surface tension by capillary rise method. „Effect of temperature on surface tension, examples of surface tension. 9 Concept of viscosity & coefficient of viscosity, streamline and Turbulent flow, Reynolds number, Poiseuille’s equation for the flow of liquid through a tube, Stokes’ law & Terminal velocity, Determination of “n” by falling sphere method.
14. Necessary conditions for the appearance & pursuance of periodic motion, classification of periodic motion based on forces acting on the source, necessary condition for the motion to be simple harmonic, characteristics of simple harmonic motion, Energy of a particle executing simple harmonic motion, Types of wave motion, equation of a plane progressive wave, Particle velocity & wave velocity. Ultrasonic waves, production of Ultrasonic waves, applications of Ultrasonic waves.
15. Principle of Resistance Thermometer, Platinum resistance Thermometer, See back Effect and Thermoelectric Thermometer, Thermocouple, Temperature of inversion and neutral temperature, Relate Thermos e.m.f. with temperature, Optical pyrometer, Comparative study for range and accuracy of above Thermometers. Concepts of a perfect gas, Postulates of kinetic Theory of gases, Pressure exerted by a perfect gas (no derivation of formula) Kinetic interpretation of temperature and Absolute Zero, deduction of gas laws.
16. First law of Thermodynamics, Mechanical equivalent of heat, specific heat of gases, Relation Cp-Cv = R/J , Isothermal & Adiabatic changes, concept of Latent heat of fusion of ice and vaporization of water.
17. Laws of reflection at plane & spherical suffice. Definition of center of curvature, radius of curvature, principle axis, principal focus and focal length, engineering application of laws of reflection. Refraction at a plane surffice, laws of refraction, Absolute and relative refractive index, critical angle and total internal reflection of light, refraction through lens (no 10 derivation of formula), Magnification combination of Lenses and power of lens. Refraction through prism, angle of minimum deviation and their relation, Dispersion and Dispersive power, pure and impure spectrum, Electromagnetic spectrum and its visible range.
18. Simple microscope, compound microscope, Astronomical telescope, Terrestrial telescope, Kaleidoscope. Electric Charge, Coulomb’s Law, Electric Field & Potential, Potential Difference Between Two Points, Equipotential Surfaces, dielectric Strength, Capacity, Units, Principle of Capacitor, Factors Affecting Capacity, Type of Capacitors.
19. Magnetic lines of force, lines of induction, Magnetic induction, magnetic field around a current carrying conductor, direction of magnetic field and current, magnetic field due to a circular loop, Biot Savarts law field due to a long linear conductor, force experienced by a current earring conductor in a magnetic field, definition of unit current, force between two long parallel conductors. Magnetic materials, molecular theory & magnetism, Di. Para and ferromagnetic substances. Flaming’s Right hand & Left Hand Thumb Rule, Maxwell’s Screw Rule, Hysterisis Loop, Electromagnetic Induction, Introduction, faraday’s law of Electromagnetic Induction, Induced E.M.F., Lenz’s law , Self & Mutual Induction.
20. Photoelectric effect: Photoelectron, laws of photoelectric 30. emission, Planck’s quantum law, Einstein’s photoelectric equation, Threshold frequency, Photo cell. X-rays : production properties & uses. Laser : Spontaneous an stimulated emission, population inversion, pumping and active system, method of production, ruby and semi conductor laser, uses. Fiber optics: Principle, application & uses. Electron microscope its principle (C) & construction .
(C) CHEMISTRY
21. Electronic structure of atoms, Discovery of electrons, protons and neutrons. Rutherford, model and Bohr’s, Bohr’s — Burry scheme of distributions of electrons. Dual nature of matter and Radiations, De-Broglie’s Equation, Heisenber’s uncertainty principle, quantum numbers, sub energy level and distribution ofelectrons in sub-shells and concept of Electronic configuration of atoms, Auffbaus’s rule, Pauli’s exclusion principle. Hund’s rule of maximum multiplicity. Nuclear rays, method of Detection, properties, disintegration theory of radio activity Nuclear reactions, Mass defect and Binding energy, Nuclear Fission, Nuclear Fussion
22. Introduction, modern Periodic law classification of elements In to s-, p, d & f- block elements Periodic properties of elements, Periodicity atomic and ionic radii, ionization potential, electron affinity, Electronegativity. Theory of Chemical Bonding, Types of Bonds, Ionic or electrovalent bonds, Covalent bond, coordination bond, Hydrogen bonding concept of resonance.
23. Electrolytes and conductors, strong and weak electrolyte, conductivity, Arrhinius theory of electrolysis, Kohlrausch law, Ostwald dilution laws, Transport no. Faraday’s Law of Electrolysis Electrochemical equivalent, Definition of 14pH, Law of mass action, Buffer solutions, calculation of Ph. Value of a Buffer solution, Acid Base Concept. Types of colloidal solution,preparation of colloids, properties of colloidal solutions, Origin ofchange on colloidal particles, prescription of Coagulation of colloidal solution. Protective colloids and Gold number, Emulsions cleansing acion ofsoaps, Detergents, Gels.
24. Occurrence, extraction, properties and engineering uses of heavy metals with special reference to Cu, Fe, Zn, Al, Si, Ge, C Electro magnetic properties of Fe, Ni, Co, Cr. 25. Properties, constitution and Engineering uses of common alloys like Brass, Bronze, German Silver, Duralumin, Solder, stainless steel pressure and die casting alloy, Bearing alloys. Corrosion of metals. Types of corrosion, Galvanic Series, corrosion control, protective coatings. Coating processes with special emphasis on electroplating and electro typing .
26. Physical properties of the polymers condensation and addition polymerization. Copolymers, effect of structure of polymer on properties, classification of polymers, Rubber —Vulcanization and compounding reclaimed rubber, Bunas SBR Neoprene ,Polyurethanes silicons, Fibers-Nylon, Dacron, orlon, polyester, Plastics and Resins—Thermoplastics and Thermosetting resins, Thermo cole and glass wool. Adhesives
27. Classification of fuels, solid fuels, liquid fuels, gaseous fuels, characteristics of a good fuel, calorific value, Determination of calorific value by Bomb calorimeter, Explosives-classification and application.
28. Lubricant- meaning types, theory of lubrication, properties of a good lubricants with special emphasis on Flash, Fire point, pour paint and cloud point. Specification number and viscosity, Paints and Varnish — Constituents, properties and uses.
29. Water hardness, types and units, Determination of hardness of water by E.D.T.A. method and 0 Hehners method. Softening of hard water , lime soda process and Permutit process.
30. Pollution — meaning, causes of Pollution, air pollution, pollutants, causes of depletion of ozone layer, influence of ozone layer depletion. Acid rain, Water pollution, sources of Water pollution BOD, COD, Soil pollution, Green house effect, Radioactive Pollution, Effects and preventive measures of pollution.
(D) ENGINEERING DRAWING
31. Chapter 1: Introduction Introduction to drawing equipments, instruments and their uses Planning of drawing sheet as per I.S. 696 — 1972 Indian standard practices of laying out and folding of drawing Different types of lines used in engineering drawing Standard practice for writing single stroke vertical and inclined capital and lower cases letters (practice to be done on sketch book) Standard practice of writing numerals (practice to be done on sketch book)
32. Chapter-2: Dimensioning techniques and standard conventions Identification and representation of various symbols used in Mechanical and Electrical Drawing Drawing Identification and representation of various symbols of building elements, materials and sanitary fittings Principles, system and arrangement of dimensioning Practice problems of current method of dimensioning
33. Chapter —3: Engineering curves and scales Form associated with engineering curves Types of engineering curves Method of construction of Engineering Curves Practice problems of drawing various Engineering Curves. Importance of scale in Engineering drawing Types of scales- plain, diagonal etc. Practical problems for constructing various types of scale.
34. Chapter —4: Orthographic projection of points, lines and planes Definitions of various terms associated with orthographic projections. Planes of projections Concept of Quadrants First and third angle method of projection Projection of line in different positions with respects to H.P. V.P. and X-Y line Projection of planes in different position with respect to reference planes Practice problems on projection of points, lines and planes. 35. Chapter-5: Projections of simple machine parts and components Procedure for drawing projections and sectional views of simple machine components Practice problems ofsketching and drawing the projections and sections of simple machine components.
36. Chapter —6: Projections of solids Types of solids and associated terminology Position of solid with respect to reference planes Drawing projections of solid in different position with respect to reference planes Practice problems to draw projections of solid in different positions.
37. Chapter —7: Section of solids Concept of sectioning planes Auxiliary planes and true shape of section Practice problems for drawing projections and section of solids.
38. Chapter —8: Development of surfaces Concept and importance of surface development in engineering field Development of surfaces for the following – •Cube •Cylinder •Prism •Cone and Frustum cone Practice problems.
39. Chapter —9: Isometric projections Limitations of orthographic projections Definitions of the terms axonometric, oblique, Isometric and diametric projections Procedure for preparing isometric oblique Isometric view of geometrical solids and simple machine parts Practice problems.
40. Chapter-10: Basics of CAD Computer hardware and software requirement for CAD Co-ordinate systems Set up for a CAD drawing Drawing objects like- Line, Circle, Arc, Ellipse, Regular Polygons, Polylines, Donuts etc. Editing Commands like- Move, Copy, Rotate, Scale, Fillet, Chamfer, Trim, Extend, Array, Mirror etc. Basic dimensioning, geometric dimensioning and tolerance Use CAD commands for simple orthographic and isometric drawings.
Syllabus for Principal Grade II/Placement Officer/ Assistant Director (Technical) Exam 2021 PDF Download : Click Here
CG PSC Principal Grade II/Placement Officer/ Assistant Director (Technical) Exam 2021 Previous Year Question Paper
CGPSC Principal Grade II Question Papers
- CGPSC Principal Grade II Exam Question 2016 Paper PDF Download (Click Here)
- Model Answer 2016
- Amended Model Answer 2016
For official notification visit https://psc.cg.gov.in/index.htm
उम्मीद है आपको छत्तीसगढ़ के Chattisgarh Principal Grade I & Principal Grade II/Placement Officer Exam 2021 Details से संबंधित सारी जानकारी पसंद आई होगी।
आने वाले समय में आपको Placement Officer Exam 2021 Details के बारे में अन्य अपडेट भी इस लेख में मिलते रहेंगे ।
छत्तीसगढ़ लोक सेवा आयोग एवं छत्तीसगढ़ व्यापम संबंधित तथा छत्तीसगढ़ की अन्य सभी परीक्षाओं के बारे में जानकारी आपको सीजी पीएससी गुरुजी वेबसाइट में मिलती रहेगी । कृपया हमारे यूट्यूब चैनल को सब्सक्राइब करें और फेसबुक पेज को भी लाइक करे ताकि छत्तीसगढ़ की विभिन्न परीक्षाओं के बारे में आपको जानकारी मिलती रहे ।
You can also read many things about CGPSC prelims‚ CGPSC mains and interview you can also so get information about other exams of Chhattisgarh PSC and CG Vyapam in CGPSC Guruji.
Also read these articles about CGPSC Exam at CGPSC GURUJI | for English | for Hindi |
CGPSC Prelims Examination Scheme | Click Here | Click Here |
CG PSC Post List and Salary Details | Click Here | Click Here |
Chhattisgarh Prelims Syllabus | Click Here | Click Here |
CGPSC Prelims Question Paper | Click Here | Click Here |
CGPSC Prelims Preparation Tips | Click Here | Click Here |
CGPSC Mains Examination Scheme | Click Here | Click Here |
Chhattisgarh Mains Syllabus Pdf | Click Here | Click Here |
CGPSC Mains Question Paper pdf | Click Here | Click Here |
Chhattisgarh State Service Mains Exam Preparation Tips | Click Here | Click Here |
Frequently Asked questions about CGPSC Exam | Click Here | |
Read about CGPSC Post List and Salary | Click Here | Click Here |
CGVYAPAM Recruitment Exams Question Papers | Click Here | |
CGVYAPAM Eligibility Exams Question Papers | Click Here | |
Schemes of Chhattisgarh / छत्तीसगढ़ की योजनायें | Click Here | Click Here |
please provide practice papers also for cgpsc principal exam